Developmental Disabilities

Developmental disabilities may become apparent before the age of 22 and thus may cause physical or mental limitations. Developmental abilities involve mental retardation, epilepsy, autism, cerebral palsy and other neurological impairments. In the result people may have either limited mobility or limited ability to take care of their physical needs. Nowadays people suffering from developmental abilities, especially in older age, face social challenges, though have the opportunity to enjoy a full and active life.All they need is understanding, encouragement and readiness of family members to help them to become part of their community. Therefore the project will work out new initiatives and ideas how to expand and strengthen the support system of family. Furthermore, the project will provide better understanding of management and support of family members and will contain relevant materials to share with families. Moreover, the project aims at assisting in future planning, trusts, will s and guardianship.The study thus will provide unique knowledge about elder people suffering from developmental disabilities. The objectives of the study are to improve family- directed support and to provide technical assistance in defining personal needs, plans as well as implementation of programs and evaluation of the results. Furthermore, the specific goals of the research is to strengthen programs aimed at providing families with abilities and proper knowledge how to take care of elder members suffering from developmental disabilities.The present project will be assessed through the methods of description, case study and desktop research. A literature search revealed over 150 articles and books on the managing and supporting people with developmental disabilities. Over two-thirds of these were prescriptive and written by practitioners, consultants and journalists. There is also a steady flow of research and ideas on how to improve the quality of family support. References Hollins S, Sireling L. (1990). Working Through Loss with People Who Have Learning Disabilities. Windsor: NFER-Nelson. Kloeppel D, Hollins S. (1989). Mental Retardation and Death in the Family. Death Studies, 13, 31-38. Stroebe, M., Storebe, W., Hansson, R. (1993). Handbook of Bereavement. Cambridge, England: Cambridge University Press.

How are evil and the supernatural presented in each of the stories? Essay

‘The Black Cat’ and ‘The Squaw’ are both short stories from the sub-genre of horror fiction. How are evil and the supernatural presented in each of the stories? Compare and contrast the two stories. Horror stories have common ingredients, including, a ruined gothic castle with monsters such as vampires and werewolves. Horror stories generally play on fear of the unknown. They cause the reader to be afraid of what they are going to see that they don’t expect. When horror stories are also short stories, they benefit from this. A larger amount of dramatic events can take place in a short space of time. If the main character of a horror story that wasn’t a short story died very near the end, the whole story would be ruined. This means that readers of short horror stories are shocked much more. In the two stories, evil and the supernatural are not presented in the way that they are normally in short stories. They are presented in a way to make the reader think about them, and how they can arise. This is unlike most horror stories, in which the aim of the story is just to shock and scare the reader. The two stories are entitled ‘The Black Cat’ and ‘The Squaw’. The tiles of stories can tell the reader about them. The Black Cat is a short story about a man who is driven to murder by his cat. The Squaw is also a short story, about a man who kills a kitten, and is then killed by its mother, in an act of revenge. The titles mean that the reader to has impressions of what the stories are about as soon as they start reading them. The title, The Black Cat gives the reader a feeling that the story is going to involve evil or magic, in some way, because black cats are commonly thought of as bad or evil, and as witches in disguise, however, when the reader reads the title, The Squaw, they are given a much less vivid impression. A squaw is an American Indian woman or wife, but most people don’t know this. This means that the reader doesn’t really know what to expect from the story. I believe The Black Cat to be better titled than The Squaw, because it is more deep and meaningful. It is deliberately intended to make the reader think that the black cat is bad, but it is the cat that turns out to be the victim. This illuminates how the reader will always make the assumption that a black cat will be evil. The cat in The Squaw is said to be like a squaw, and I believe that this is the only reason it is titled like this. The beginnings of stories are important for giving the reader an impression of what is to come. The beginnings of the two stories do not give particularly much atmosphere of the supernatural. At the beginning of The Squaw, the narrator just accounts about how he and his wife are on their honeymoon, and how they meet Elias Hutcheson. The reader is given no indication that it is a horror story throughout the beginning of the story. Similarly, at the beginning of The Black Cat, the reader does not receive much of an impression of the supernatural. The character just seems to introduce himself. The only clue the reader receives about the supernatural is the way the cat is introduced into the story. At the beginning of The Black Cat, there are a few clues about what will happen later in the story. The narrator accounts about how the events that happens in the story â€Å"have terrified-have tortured-have destroyed me† He also states that he is going to be hung, whereas the beginning of The Squaw provides the reader with no clues about what happens later. The beginnings of the stories are quite different. The opening of The Squaw is just like a normal non-horror story and the opening of The Black Cat is a character confiding in the reader about what has happened to him and how he has been affected. The atmosphere and setting give the reader a strong background feeling about the story. The typical setting of a horror story is a lonely, dark place, like a ruined gothic castle. The setting of The Black Cat is not much like this. It is mainly set inside the man’s head, and so does not contain many references to what happens outside in the world. The reader is not given much information about where the man lives, and the actual physical setting of the story. This is because the story is intended to primarily portray the emotions of the character over his actions. The setting of The Squaw is very different to this, although it is also unlike that of a conventional horror story. The setting is very normal and pleasant. The narrator and his wife are on their honeymoon, and the reader is told how the town is very pleasant, because the sun is shining, and the couple are just lazing about enjoying themselves. It comes as a complete shock when the kitten is killed. After this happens, it is still unlike a normal horror story setting, until right at the end, when the cat appears and kills the man. The setting of The Black Cat adds to its overall effect very well, because the story is supposed to show his emotions, and it is a story about a man telling the reader how he became evil and mad, as does the setting of The Squaw, which shows that evil can occur in any place, not just in a typical gothic horror story setting. Tension is usually viewed as the most important element of the traditional horror story. It keeps the reader interested in the story, and causes them to be scared of what may happen next. Tension is not used to full effect in the two stories. The reader is not given much information in either of them to trigger their imagination and get them thinking about what will happen next. For example, in The Black Cat, the main events happen totally unexpectedly, without any tense build up. In The Squaw, there is a bit of tension, that concerns the reader wondering what the cat is going to do to the man, but there is only one very big event at the end of the story, also without much built up tension. Poe definitely aims to shock the reader in The Black Cat, rather than surprise them. A surprise is when something unexpected happens, but it is usually a good event, and the person it happens to often has some kind of a clue that it will happen. A shock is when something very unexpected happens. It is almost always a bad event, and the person always has no clue whatsoever that it will happen. The reader is shocked on multiple occasions, such as when the narrator cuts his cat’s eye out, when he hangs the cat, and when he murders his wife. I believe that Poe never surprises the reader, and that he has no intention of doing so. In The Black Cat, because the reader anticipates the man to do something evil at different points, this affects their feeling on the evil inside the man. They expect the man to commit more acts of evil, but at the same time, they are not sure whether the source of evil may change to become the cat. On the contrary, Stoker aims to surprise the reader. The reader knows throughout the story that the cat is going to get its revenge some way. When it kills Hutcheson, this is a surprise, because the reader expects it to happen. It may be considered as a bad event, thus being a shock, but it may also be considered a bit like a good thing in a way, because he deserved to die. This feeling of someone deserving an act of revenge adds to the horror theme of the story. The only shock in the story is when the kitten is killed. For these reasons, the usage of shock and surprise in the two stories is very different. The two men who kill the cats in the two stories have very important roles in the plot, as do their characters. The narrator in The Black Cat seems very emotional. He often confides in the reader about how The Black Cat drives him to insanity, whereas Elias P. Hutcheson is not given a particularly prominent character, and the reader does not learn much about his emotions. In The Black Cat, the narrator is used as the main character, to confide in the reader, about his experiences. In this way, the author brings about the questions about evil and the supernatural. In The Squaw, Hutcheson is instead used as a tool for the plot to be developed. He doesn’t have any visible emotions shown. He seems only to be in the story to kill the kitten, and then to be killed at the end. The reader feels sorry for the narrator in The Black Cat, because he is driven to madness and he is very hopeless, but they also feel hatred for him because of all of the cruel things he does. The cats are probably the most important elements in both of the stories. In The Black Cat, the cat is initially introduced amongst the narrator’s other pets, and in The Squaw, the cat is introduced when the characters see it with its kitten. Unlike at the beginning of The Squaw, at the beginning of The Black Cat, the reader is given a small hint of the supernatural powers of the cat, in the title, because black cats are said to be bad luck, and witches in disguise. When the cat is introduced, it is written in italics. This gives the reader an obvious clue that it plays a big part in the story. In The Squaw, the reader is given no hint whatsoever that the cat has any supernatural powers. It is only at the very end, when the cat kills the man that the reader believes that it may have something out of the ordinary about it, although it never truly seems to have any actual supernatural powers, other than the way it strangely strives to get its revenge, and the way it has the intelligence to kill the man in the way it does. Later on in The Black Cat, the reader is given a larger impression that the cat is supernatural; by the narrator acting like it is driving him to madness. The image of the cat ends up on the wall of the burned down house, and another cat comes into the story, that seems to really be the same cat, and it also has a mark that turns into the shape of the gallows. These things would not happen if there was not an intention of the writer for the cat to be somehow supernatural. On the other hand, in The Squaw, the reader is not given very much of an impression that the cat has any supernatural powers until at the very end. When the cat tries to follow the man, the reader just believes it to just be a normal cat, because it does not succeed. The only hint the reader gets at this point is the amount of hatred the cat seems to show. The author comments on how Hutcheson and the narrator’s wife notice this. This is also seen in how the cat tries so hard to reach Hutcheson, to take its revenge, by desperately trying to jump up a huge wall that is seen as totally impossible by the other characters, which are not maddened by anger. As the story of The Black Cat progresses, the reader thinks of the cat as both a victim of evil, and a source of evil. At the very beginning, the reader believes that the cat will be the source of evil, because black cats are generally thought of as such. When it’s eye is cut out, this is when the reader begins to think of it as a complete victim, but as the narrator becomes more demented, they begin to think of it as somehow causing him to do this, and as having some sort of special power. In The Black Cat, the cat is used as a tool to bring out the narrator’s character, whereas in The Squaw, the cat is used to provide a victim and a source of evil, to make the reader think about the true meaning of evil. The way the reader recognizes the two stories can vary a lot. They are primarily about the two cats, and whether or not they are the sources of evil in the stories. This means that the reader’s understanding of the stories entirely depends on what they think of the cat. Both of the stories explore the meaning of the nature of evil. The nature of evil is very disputable in both of the stories. They are primarily about the question of whether it is the men or the cats that are the sources of evil. They show that it is really the men who are actually the sources of evil. The stories both have this theme, and both illustrate the men to be the sources of evil, making them similar. In The Black Cat, the man is somehow provoked by the cat to become evil, but in The Squaw, the man is the one to initiate the trouble between himself and the cat, by killing the kitten, meaning that the ways the two men come to be the sources of evil are different. Usually in horror fiction, it is the stereotypical character, like the cat that is the source of evil, and the people are usually victims. The two stories show that these are misconceptions. They are deliberately controversial. The narrative structures of the stories greatly affect the way in which the reader understands them. As does The Squaw, The Black Cat has a first person narrative. Because of this, the reader can realise the character’s feelings and emotions to a much greater extent than if it had a third person narrative. This affects the reader’s thoughts about the evil of this character. Because they can realise his feelings, he can tell them why he did things, and his justifications for them. They can then judge for themselves whether he has good reason to do things, and whether or not he is evil. The first person narrative gives the reader an insight into the mind of the evil man. This helps to show them that evil occurs for a reason, and that people are evil because of something that has happened, or a motive that they have. It also implies that evil people are not just the bad things in stories for people hate without thinking about why they evil. Poe tries hard to show this in his story. The first person perspective of The Squaw also contributes to the evil in the story, but in a very different way. The narrator seems quite neutral and unfazed throughout the story. He is nothing like a typical horror story character, and he makes it seem very unconventional. He helps to make the source of evil disputable. His character makes the reader think about what the real evil in the story is. The narrator’s character helps the implication that a source of evil is not always where it first seems to be. The evil may be in something or someone that is never expected at first, and that it is not always in the clichà ¯Ã‚ ¿Ã‚ ½d, expected place. The viewpoints of the authors are important in understanding the stories, because they tell us the reasons for the stories being written, and how the authors understand the natures of evil and the supernatural. I believe that Poe understands that evil and the supernatural can affect anyone, and that no one is born evil and I believe that his purpose in writing The Black Cat was to give an insight into the mind of someone who goes mad. I believe he wanted to show that people are driven to do evil things, and they do not just suddenly turn evil and crazy. He wanted to show that evil people are people too, like everyone else. This does not fit the general trend in horror stories very well. Usually, the evil character is just there to be someone for the reader to dislike and fear. The reader is never usually shown any reason for the person to have become evil. Stoker believes that evil is not always how and where it seems, as Poe also does, and I believe that he wrote The Squaw to show this. This fits the horror story genre in the same way as The Black Cat does because it is not like most horror stories. Like The Black Cat, it depicts a different meaning to evil and the supernatural, and it doesn’t rely on clichà ¯Ã‚ ¿Ã‚ ½s. I believe that evil and the supernatural are well presented in the both of the stories. Both of the authors wrote the stories to give a deeper meaning to the way they are depicted in horror stories. Neither of the two stories is typical of the horror story genre. They are both deliberately meant to show the different ways that evil and the supernatural can exist, that are not usually depicted in horror short stories. I believe The Black Cat to be the more effective as a horror story. The way it depicts the mind of a madman is more effective in horrifying the reader. His feelings and reactions give the reader a chilling and disturbing insight into the mind of an evil, twisted murderer.

Materials and Hardware Essay Example | Topics and Well Written Essays - 2500 words

Materials and Hardware - Essay Example The Change from One Material to Another in Aircraft Development The method for the choice of materials for aircraft development has changed over the years. For the Flyer, the Wright brothers utilized the first cast aluminium engine block and the major drivers for the material chosen were static strength and weight. The materials used on the main airframe were wood covered with a fabric. Wood is a natural compound possessing long fibres of cellulose, which are held together by a weaker matrix of lignin. The use of wood as a material for the aircraft structure illustrates that the use of composite airframes is not new in the aircraft industry. After the creation of precipitation hardening and the technique to protect the aluminium surface by anodizing and cladding, aluminium has been the main material for aircraft development (Merati, 2010). The reason why aluminium has been used as the primary material for aircraft development is due to its high toughness, easily recyclable, no low te mperature brittle fracture, long term performance, high specific strength (calculated by strength/density), ease of manufacture (particularly in extrusion), and readily joinable by mechanical riveting or welding. These advantages make aluminium the preferred metal for aircraft development. ... The design method for materials utilized in aircraft structures were linked with sufficient strength and low weight (Schijve, 2009). As time evolved, there was need to develop aircrafts that were lighter and faster. This was mainly driven by the needs of the market. Aluminium was the next material that came into the minds of the developers. The material is light, very tough among other advantages. Longer lifecycle, safety, low maintenance cost and reliability are other factors that have triggered the change from one material to another in aircraft development. Why Aluminium Alloys Are Used Instead Of Pure Aluminium in Aircraft Development Pure aluminium produced commercially is a white lustrous metal that ranks top in its resistance to corrosion, sixth in ductility, and second in malleability scale. Aluminium in combination with various levels of other metals creates alloys, which are then used in aircraft development. The principal ingredients used in the aluminium alloys include ma gnesium, chromium, silicon, and manganese. These ingredients make the aluminium alloy resistant to corrosive environments. However, aluminium alloys with substantial levels of copper are vulnerable to corrosive action. The amount of the alloying elements is rarely more than 6 or 7% in the wrought alloys (Federal Aviation Administration [FAA], n.d.). Aluminium is the most widely used metal material in modern aircraft development or construction. It is important to the aviation industry because of its relative ease of fabrication and its high strength to weight ratio. The outstanding feature of aluminium is its lightweight (FAA, n.d.; Lye, 1989). The metal melts at relatively low temperature of around 1,250Â °F. It is an excellent conductor and nonmagnetic. The tensile

IT corporate governance Research Paper Example | Topics and Well Written Essays - 1250 words

IT corporate governance - Research Paper Example As for effects on public organizations, especially until recently, research has been scarce (Colley 2003). The rational for the research paper is to investigate and analyze new trends in information systems application and their impact on information, effects on corporate design, structure and productivity. It is assumed that advances in technology, especially computer, information, and information technology, have presented organizations and managers with dramatic new challenges and opportunities, and researchers have been pressing to develop the theoretical and research grounding needed to understand and manage these developments. It is supposed that information technology allows a corporation greater decentralization of functions thus ensuring effective management and control. Computers, the Internet, electronic mail, and other forms of information and information technology make possible more elaborate and interactive networking of people and organizational units, both within and between organizations (Dine, 2000). Some organizations have moved away from traditional hierarchical and departmental reporting relationships to forms of virtual organization and dynamic network organization, in which a central hub coordinates other units that formally belong to the same organization, as well as organizations formally outside the hub organization (such as contractors or agencies with overlapping responsibility for public agencies), via e-mail and the Internet. Advances in IT reportedly lead to smaller organizations, decentralized organizations, better coordination internally and with external entities (Buck and Sha hrim 2006). Organizations acquire and distribute internally information to carry out the critical functions of decision-making. These activities require the processing of information. There are two perspectives on organizational

End-of-Life Ethical Dilemma for Nurses Essay Example | Topics and Well Written Essays - 500 words

End-of-Life Ethical Dilemma for Nurses - Essay Example In a qualitative study, the differences in the ethical burden on end-of-life decisions between nurses and doctors were determined.   Although the research covered small sampling, which included seven doctors and 14 nurses working in critical areas, it never failed to convey the universal dilemma encountered by healthcare workers which is the struggle to arrive at a conclusive and moral decision regarding euthanasia.   Furthermore, the study’s findings concluded that the main difference in mercy killing is that physicians are to deal with the â€Å"decision making itself† whilst nurses have to â€Å"live with these decisions†.   Mercy killing is the kind of problem that does not leave the patient the sole right to decide.   It comes in varied forms of condition where the end result is the termination of the life of the patient.   Although a patient voluntarily requests for the termination of his life, ethical considerations must be taken into account.   More often a terminally ill patient is depressed so that the only solution he regards to, is death.   This issue leaves nurses and physicians the responsibility of determining the mental and emotional capability of the patient to decide for himself.   There is also the issue of the legality of the family to represent the unconscious, clinically dead patient and to request for discontinuation of life support.  Ã‚   Across the world, euthanasia has occupied a constant seat in the debate regarding morality.

Review of Three Ethical Theories Essay Example | Topics and Well Written Essays - 1250 words

Review of Three Ethical Theories - Essay Example According to this theory, individuals are seen as rational and utility maximizing entities. Several business decisions today are based on this principle; that is, the correct business decision is one that maximizes the net benefit to the society. Thus, the decision which is in the best interests of the society is one that maximizes the net benefit to the society. The founder of traditional Utilitarianism, Jeremy Bentham, argued that best and most valuable judgments are those that are based on objective considerations (Scarre, 1996). Thus, the benefits and costs of each public policy should be weighed and then the policy should be executed only if the benefits outweigh the costs. The theory inherently assumes that the costs and benefits can be measured (Scarre, 1996). Thus, the value of the costs can be subtracted from the value of benefits. The theory does not aim at maximizing an individual’s utility. It aims at maximizing the net benefits to the society. The provision of pub lic and merit goods is based on this theory. It is consistent with morality since it takes into account ‘everyone’s’ interests in equal amount. ... According to him, each individual have a moral right to this and that this moral right of individuals translates into duties for other individuals. The first foundation of this imperative is based on the principles of universibility and reversibility (Butler, 2008). Thus, individuals must ask themselves how they would feel if other treated them the same way and how would they feel if everyone did the same. Thus, according to Kant, the immoral decisions and actions were those that one wouldn’t want for oneself (Butler, 2008). The second imperative states that individuals ought not to be treated merely as means; that is, their capacity to choose freely for themselves must also be developed. This clearly demonstrates that while the Utilitarians imply an ‘economically rational’ justification for actions, Rights Ethics correctly captures the human values and goes beyond the traditional cost-benefit analysis. Thus, according to Utilitarians, individuals could be deprive d of their right to liberty simply because the net benefit isn’t maximized (Jeurissen, 2007). Hence, Rights Ethics takes a step forward by respecting not only the positive but also the negative rights of individuals ( that is, the freedom from coercion). Thus, the Rights Ethics many of the flaws associated with the Utilitarian view. Firstly, the utilitarian view simplistically assumes that all the consequences of an action can be quantitatively measured (Smart & Williams, 1973). This is not always the case. For instance, how could one assign a value to one’s life? Secondly, it deals insufficiently with rights, morals and justice (Smart & Williams, 1973). As outlined in the following

Business - Affirmative Action Research Paper Example | Topics and Well Written Essays - 1750 words

Business - Affirmative Action - Research Paper Example It is an act to increase the representation of minority by giving them preference on the basis of gender, color, origin, sexual orientation etc. Moreover, this act is also done to increase the participation of the under representative part of the society to showcase what they are capable of. Historical Background: General Background History The term ‘affirmative action’ was first used in 1935 in a National Labor Relations Act (29 U.S.C.  §Ã‚ §151–169). The usage for it was not for race but to provide remedy for employers to avoid discrimination of union members. However, in books the origin of this term was mentioned to root from the United States. During the presidency of John F. Kennedy, it first appeared in Executive Order 10925 and it was signed by the President on March 6th 1961 (Jain and Ratnam). It was used to refer to methods used to achieve non-discrimination policy implementation. In 1965, Executive Order 11246 was issued by the President Lyndon Johnso n which stated that federal contractors should use affirmative action to avoid discrimination while employing a person. Hiring should be made irrespective of race, religion and national origin. The 1964 Civil Rights Act implemented this clause that no race discrimination by statute should be carried at the workplace. Title II of 1964 act stopped places which were public, such as restaurants or hotels from discriminating on the basis of race. Gradually in 1968, gender was also added to the list. Purpose of Affirmative Action Since the Civil Rights Movement, much has been changed in a positive manner and a great contribution to it was the introduction of Affirmative action. This attempt was to achieve a better and more equal society. It was started as a ‘Corrective measure for societal and governmental discriminations against groups that have been at a disadvantage and subject to prejudices’. However, much has changed since its inception. Supporters of Affirmative Actionà ‚   There are many people, organizations and societies supporting the inherent goodness of affirmative action. Some of them are given below: According to a report published in 2007 by Pew Research Center, support for affirmative action in the American public has increased to 70% in 2007 compared to 58% in 1995. The US Military is another endorser of affirmative action. In 2003, many high ranking officers of Army, Navy, Air force and Marine Corps planned a rally in support of affirmative action for a Supreme Court case Grutter v. Bollinger. The fortune 500 companies have been a popular endorser of affirmative action. More than 60 leading companies in fortune 500 which encompasses 3M, GE, HP, Kraft Foods, Coca-Cola came out for the support of affirmative action in 2003. Universities have been a popular supporter of affirmative action. Harvard University, University of Chicago, University of Pennsylvania, Yale University and Dartmouth College provided their support for race-conscious a dmission programs. They wanted to promote diversity in all forms and, therefore, in 2003 they showed their popular support for it. Popular athletes are endorsers of affirmative action. Many of the Michigan’s leading sports athlete including Tom Izzo (Michigan State University), Joanne P. McCallie (Michigan State University), Tommy Amaker (University of Michigan) and Ernie Zeigler (Central Michigan University) spoke about the importance of affirmative ac

Victors Dilemma Essay Example | Topics and Well Written Essays - 500 words

Victors Dilemma - Essay Example Taking into account the risks involved in the first two options, the probability of earning money by choosing any of the two changes. In the Figure 1, the three options are substantially evaluated in terms of the probability of each and the payouts each option entails. If Victor chooses to sue the motorist, there is an equal chance of him to win or to lose. However, this option will cost him a flat fee of $500. Losing the case will cost him nothing but the $500 fee for suing. The option of threatening to sue automatically costs Victor $100 for the letter. Further decisions will depend on the motorist's reaction. If the motorist offers a settlement offer of $1000, this means that there is a higher chance of him winning the case if he chooses to sue. This is represented by a 60/40 probability in the figure. If the motorist ignores the letter, it implies that Victor's chance of losing the case if he wishes to pursue the case in the court decreases. He may to ignore the case as well. This leads him to doing the third option which is doing nothing. Doing nothing after threatening to sue costs him $100 for the letter. Y et, if he chooses the third option without sending any letter, it would not cost him anything. It even gives him peace, which is valued as $100. Figure 2 shows the estimated value of each option.

Adversity & 2007 albums Essay Example for Free

Adversity 2007 albums Essay Does adversity truly define somebody’s character? Adversity, as defined by Webster’s dictionary, is a state, condition, or instance of serious or continued difficulty or adverse fortune. Horace’s opinion on adversity is that without adversity in one’s life, their true character would not have an opportunity to develop. Horace derived his opinion about adversity from having to overcome an obstacle of his own. Having lost the battle with the Roman Army, his prestigious life as a general and his â€Å"prosperous circumstances†, he faced with the true challenge to overcome this defeat. His true character was tested and created an opportunity to do what was needed to survive. I agree that through adversity, one’s true character shines above the mask that is shown during ones â€Å"prosperous circumstances†. At the mere age of 16, I have overcome many situations in my life that showed me the truth to my character. The passing of my father is one example. At the time, my main concern was that the life me and my family lived would never be the same. Having lost not just a father-figure, a role model, and one of my closest friends at that age, my family lost the head of our household. I faced the challenge of caring for all the people around me who shared the same aching feeling of the loss I did, while at the same time trying to fill the void in my heart that was buried with him. Confronting the loss of so much in your life is not easy. I remember one of the largest moments during this time that made me come to terms with his loss. The first few football practices of my 6th grade year were the hardest. The occasional glance to my mom watching us practice turned my enthusiastic and serious attitude toward practice into a grieving stare as I see my father missing from the picture. I would never be able to keep playing like this. But I dug deep, and stayed dedicated to the sport that he supported me at, and with time and devotion I was able to understand that even though my father is not there physically, he will always be right there next to me on the field, cheering me on like he did in the past. Even though the physical aspect of my father is gone, I will always know that he is there with me, enjoying the best seat in the stadium. Another situation in my life that I have had to overcome adversity is the  injury in my left knee that I face today. The day I heard that I would not be able to play football my junior year, I did everything I could to distance myself from the game and my teammates. We all have those genuine fears of incidents that lead to where we cannot do hobbies or interests of ours. Imagine a graphic artist losing his hand along with his ability to draw, or a ballet dancer unable to perform in a recital because of a damaged knee. Every day is a battle. The physical strength it takes to go through a day of physical therapy, the mental strength I use to push myself to be on the field again, and the spiritual strength it takes to remind myself that I am still part of this team. Like that Gatorade commercial, â€Å"One More† mean to me that I am one more day closer to reaching my goal of playing alongside my friends, one more set of exercises to strengthen my knee, and one more opportunity to play the game that I love. I know ask myself, without adversity in my life, how would I know what type of person I am and what I value most? I wouldn’t. Had Horace not faced adversity, would his writing still be the same or at that even exist? Horace wouldn’t have needed to turn to poetry in order to save his life, but instead gone with his life as nothing but a mediocre general in the Greek Army, Instead of being the inspiring poet we know to this day.

Calculate Young`s modulus Essay Example for Free

Calculate Young`s modulus Essay Thus of course meaning that factors that need to be kept constant must be identified and kept that way. In this scenario I will be isolating Force as my variable. Force is directly related to the load on the wire; only multiplied by the gravitational pull (approx. 9. 81) as the load is measured in Kg as it is a mass. From the equation we can see that a change in Force will indeed affect the extension of the wire, at this stage it is apparent to say that; Theoretically the larger the force the greater the extension according to the equation above, as it is the value that is being divided. Following this it is also imperative that both the Cross sectional area of the wire is indeed accurately measured, as well as remaining constant through out the experiment, as a change in this value would indeed effect the value for Tensile stress, and in turn the extension. The length of the wire must also remain consistent through out the experiment. This is because each unit of wire will stretch or elongate by a proportional amount to the load being applied to it. Thus changing the length of will increase or decrease the amount of units of wire that can be stretched, causing different readings to be measured. The wire will indeed elongate and extend no matter what the length, but for these experimental purposes it is best to be long as explained above to stand a greater chance of measuring it properly. The important thing is to set the length of wire you wish to work with and do not change it. B) Implementing Results, observations and description. Cross sectional diameter of wire Measurement number and degrees of rotation 1/mm 2/mm 3/mm 1/ Average   Calculation of Average wire diameter=Thus the average cross sectional area of the wire is Force = mass 9. 81 ms Table of readings Final length, attempt; Mass/g Mass/Kg Force/N Orig. L/M 1/M 2/M 3/M Mean Extensionnfortunately errors can easily occur in this experiment, the first way of minimizing the percentage error in the experiment is to identify the sources that could cause such a problem; these being. When measuring the extension there are 3 main sources of uncertainty. Meter rule Parallax error   Zero error I plan to minimize these by;   Careful choice of meter rule, as man are bent and warped   Fixing a head and eye position against something so that the parallax error is minimized as I will be looking at the ruler from exactly the same angle. Record results from 0. 0 M   If there is a zero error, take it away from the results. When measuring the weight of the mass the following sources could effect the results; Zero error on the scales Not allowing for the weight of the cradle Simply using the weight that is imprinted on the mass instead of weighting it. I will minimize these sources by selecting my masses carefully and weighing each one separately to find its exact weight, as well as double checking a pair of scales against each other by putting the same weight on both scales to see if there is a zero error. The final measurement source of error is the measurement of the diameter of the wire. This is typically a source of inaccuracy because the wire does vary in cross sectional area, because of the way it was made. This can be accommodated for by measuring the wire extremely accurately with the micrometer, and measuring the wire in three different areas of the length and taking two readings at each of the three points along the wire, twisting it 90 degrees at each point to allow for ovals etc. The average can then be taken and used in the calculations to give a better representation of the wire being used Diagram of ideal and misshapen wire. Observations for experiment conducted on the 14th of December 2002 * At approximately 0930 the equipment was set up and the working area was in suitable condition to go ahead with the experiment as planned. I had two main concerns whilst conducting the experiments, these were of measuring natures, the first of these being that, when measuring the wire with the micrometer it proved initially extremely hard to turn the wire 90 degrees, I quickly remedied this by sticking a label on the wire so that it was clear what angle the wire had to be turned.   The second was that of concerning minimization of the parallax error, this proved to be quite challenging, so we decided to look at the ruler twice each a couple of seconds apart and in what i8 thought was the same position to see if it was a fair test. This way through up different results so we deemed it necessary to have someone stand over the wire and not move until the experiment was finished to minimize this risk.   Another observation I made was that I didnt think we were measuring the extension accurately enough I felt that measuring it to 1mm was far to inaccurate as the extension as will be seen by the graphs was minimal, I will mention this point heavily in the Evaluating.   The equipment was packed away and the experiment was completed within the hour.   I observed a changing in mass or load on the wire and no change in any of the identified variables. C Analyzing Evidence and Drawing Conclusions. Force/N Area/M Sress/Nm (Pa) Length/M Extension/M Strain Youngs modulus 1 The stress was simple to calculate as it simply meant dividing the force by the area, as so; The strain is a simple ratio it involves dividing theextension by the length; Thus the youngs modulus can be found for every plotted point separately on the graph; this is done by dividing the stress by the strain. As I predicted earlier the material obeys hookes law and froms a straight line through the origin until the elastic limit is reached. As well as we can calculate the extension from the gradient of the graph because its equal to L / EA. When a material obeys Hookes law, then its force, extension graph is a straight line through the origin (see graph). This is only the case up to the proportional limit. The graph being a graph of force against extension, the area is the energy stored in the wire. As the equation of the graph is F=kx, the equation of the area is . From the graph we can say that as the load increases on the wire the extension also increases proportionally, up to a certain point known as the elastic limit, this is because it is obeying kooks law as described above, and for this material whilst under low load the strain is proportional to the stress.. Show preview only The above preview is unformatted text This student written piece of work is one of many that can be found in our GCSE Electricity and Magnetism section.

Performance Criteria For External Walls

Performance Criteria For External Walls External walls are referred to as cladding if they are made of masonry or panels. External walls are vertical elements which enclose the building. In the design of the specified building, the main performance criteria needed as requested by the client are as follows: WEATHER PROTECTION: Walls must be able to exclude rain, wind, snow, frost and sometimes heat and glare from the sun. The walls should often at the same time need to allow the building to be naturally ventilated and natural light to enter the building. In this respect, there are two broad functions the wall needs to perform.ÂÂ   It should resist moisture from the ground and therefore would normally need damp proof courses to do so. It should also be able to adequately resist the penetration of weather from the outside to the inside of the building. FIRE RESISTANCE OF EXTERNAL WALL The external envelope of the buildingÂÂ  should not provide a medium for fire spread if it is likely to be a risk to health or safety. The use of combustible materials for cladding framework, or of combustible thermal insulation as an over-cladding or in ventilated cavities, may present such a risk in the proposed buildings, even though the provisions for external surfaces may have been satisfied. Considering the event of fire breakout in the building, the walls of the building are required to inhibit the spread from room to room of the flames, smokes and gases. The external walls should fulfill the obligation of containing the fire within the building for prescribed period of time, thus limiting spread to adjacent buildings. It is ultimately necessary that the walls be able to perform their structural functions during the fire until all occupants have had sufficient time to escape. Based on the use of the building in this project, the time deemed necessary for such an escape is ÂÂ ½-2 hours. The materials must be carefully chosen so as to resist fore to the utmost. The combustibility of the materials must as low as possible so as to prevent quick spreading of the fire. THERMAL RESISTANCE Due to increased energy cost of recent times, and the higher comfort expectations of occupants of buildings, the pressure for better thermal insulation has become a predominant factor in the performance of buildings. There is therefore greater demand for service engineers to be involved in the thermal design of the external fabric of buildings. It therefore makes economic sense to design the walls of a building so that thermal energy consumption will be kept as low as possible. It is therefore recommended that the service engineers be aware of the required heating cycle of the building and should thus decide what thermal insulation is required and where it should be positioned. He should advise on the positioning of vapour barriers, thus reducing the occurrences of one of the major defects common in modern buildings, that of condensation. The walls having thermal resistance will limit the amount ofÂÂ  heat the building will lose from the internal spaces, and gain from the outside environment.ÂÂ   The materials used will determine exactly how compliance is achieved andÂÂ  manufacturers can generally provide some form of guidance for their products. Cavity Walls The cavity can be fully filled with insulation or partially filled (consult the manufacturers before proceeding). If it is partially filled then an airÂÂ  gap is generally required, the size of which willÂÂ  varying depending onÂÂ  the specific products used for the wall construction and insulation. The insulation should go at least 150mm below the DPC level. Solid Walls These walls are generally insulated by placing some form of thermal element on the inside and rendering the outside. The thickness of these products will depend on the thickness and type of block used. STRENGH AND STABILITY: Two main categories are distinguished here: Structural and non-structural. The former make a positive contribution in the structural integrity of the building and in doing do can act in two ways: 1. the walls may be load bearing and/or stabilizing. Here, they are designed to carry not only their own weight but also other loads exerted by the roof and floors. These walls are designed to resist compression. 2. When performing as stabilizing walls, they are designed to resist horizontal or oblique forces such as wind pressure, earth or water pressure, or thrust from other parts of the building such as arches. These walls are designed to resist shear and are often known as shear walls. The later are more commonly called non-load bearing. They are therefore designed to carry only their own weight and not that of any other elements in the building. It is worth noting here that such walls may still be requested to resist horizontal loads, in particular wind loading. DURABILITY It is often an expectation from most clients that the external fabric of the building will have an acceptable life expectancy. The external walls of the building of this design must be able to withstand the effects of the weather, such as wind, frost, snow, rain, sun and heat to be durable. The walls should also be able to resist physical damage to which they will be subjected during their life. Maintenance is therefore necessary in the elements of the building, including the walls in order to achieve a prescribed life expectancy. It is worth noting that care must be taken in the maintenance work as damage almost often results in the maintenance of the walls. BUILDABILITY Buildability relates more to judgment and knowledge than to mathematical analysis. Buildability reflects whether the specific design can be assembled by various trades without compromising the functional requirements during construction. Buildability is more related to good design than to superior workmanship because, as experience indicates, only a good design can combine all the environmental factors while presenting an easy construction pattern. For the most part, it is the designer who attends to the aspects of buildability such as material installation under different weather conditions, level of skill required for installation, and construction tolerances. Often buildability problems arise when different professions are involved; for instance neither the window manufacturer nor the wall designer may consider the window wall interface as their concern. It is therefore necessary not to disregard the difficulty that the builder can experience when constructing the proposed office building. NOISE Noise can cause stress and loss of sleep, and lead to ill health. For an office to be comfortable it must be designed so that its layout and structure keep noise to an acceptable level. Designing for noise control is not easy, because the sources of noise are not always apparent at design stage, and the paths by which sound travels are not always obvious. The aim, however, should be to ensure that most activities can be carried out without undue interference from internal or external noise. For external walls where windows provide passive ventilation, the need for ventilation must be balanced with the need to reduce noise open windows do not reduce noise from outside. To effectively reduce external noise, the external walls should be well constructed and insulated. A walls ability to reduce noise is dependent on: type of construction; materials; and insulation There are two main construction techniques for walls: Continuous construction A wall in which the components are mechanically connected such as single brick or single stud. Discontinuous construction A dual layer of wall in which the leaves have a minimum 20mm cavity and are not mechanically connected in any way, except at the periphery such as brick cavity and discontinuous stud. When choosing a wall system to reduce noise from the inner city environment, the contractor should consider: materials; general construction; and best practice design Increasing the thickness of the building materials, and ensuring all gaps are sealed can help considerably when dealing with sound insulation. An important feature of well constructed external walls is correctly sealed junctions, as this aids in the reduction of noise transmission through gaps and cracks at the edge of building elements. These noise flanking paths can defeat noise reduction techniques. An important feature of well constructed exterior walls is properly sealed junctions, which aid in the reduction of noise transferred via flanking paths (gaps at the edge of building elements that allow sound to travel through). Even a sound-rated wall may not perform adequately, if joints and junctions are not properly sealed. Challenges to good acoustic design of external walls can arise from noise transferred via flanking paths. It is important to minimise flanking through services and penetrations. The impact isolation of a wall may also be compromised by insufficient attention to detail. Flanking is the transfer of noise through paths around a building element, rather than through the element directly. Flanking can descr ibe the transfer of noise through gaps and cracks in a building element, or via incorrectly sealed junctions between two materials. These noise flanking paths can defeat noise reduction techniques. QUESTION THREE HOW PARTITIONS, SUSPENDED CEILING AND RAISED FLOOR CAN BE USED TO FACILITE THE CLIENT REQUIREMENT OF THE BUILDING PARTITIONS can be described as an internal wall of a structure which divides a building into a number of parts to serve its purpose. Partition can be divide into two main groups that is, load bearing and non load bearing. FUCTIONAL REQUIREMENT OF STEEL PARTITION SYSTEM The following are: Sound Insolution: Is the reduction obtained when sound passes from one side of a partition to another. Sound may considerd as waves of pressure. Sound Absorption: Is the material used to reduce the amount noise that is reflected from a wall surface back into the room and does not increase the sound reduced value of the structure. Sound absorption is usually achieved by adding a soffit finish to the head surface of a wall. Flexibility: The material should be flexible enough to resist any forces or any movement that will change it actual function. Strength and stability: The partition system should be strong enough to resist the various loads that may be imposed on it. These loads include permanent loads such as shelves and wash basins. Services and accommodation: Partition system should be providing with spaces or voids within partitions system to provide services accessed for repair and maintenance. TYPES OF PARTITIONS SYSTEM Metal stud partition: These can be defined as vertical internal space divides and are usually non loads bearing walls. These can be permanent, constructed of material such as metal post and sheet lining such as plasterboard. This type of partition is suitable for rehabilitation works. Joints in panels are usually filled as the plasterboard is normally covered with a scrim coat of plaster. It is however slowing, wasteful of materials and it is difficult to install components such as door and windows hatches. Frame and sheet partition: These are similar in concepts metal stud and sheet partitions; except that they are constructed using an arrangement of proprietary components such as doors and glazing element. Cutting component is kept a minimum and joints between panels are usually expressed using cover strips. Frame and sheet partitions are suitable for dismantling and relocation, and can be called demountable partitions. Frame and panel partition: These are variations on the frame and sheet partition. In this system the panels are placed between the studs or frame which is left exposed. These methods are constructed by using self supporting panels, with double skin of plasterboard separated by egg-create element. SUSPENDED CEILING Suspended ceiling: These can be defined as ceiling which is fixed to a framework suspended from the main structure thus forming voids between the two components. It is used where enough height as available to hang it from the ceiling joists and still have enough height between the floor and new ceiling. Suspended ceiling have two main functions: a metal grid that provide a structural and a height weight panels that slip into grid. The basic functional requirement of suspended ceiling is: They should be easy to construct, repaired, maintain and clean. Should be designed that an adequate means of access is provide to the voids spaces for the maintenance of the suspension system concealed services and / or light fighting. Provide any required sound and / or thermal insulation. Provide any required acoustic control in terms absorption and reverberation. Should be provide with fire resistance or protection to structure steel beams supporting floor. Conform with the minimum requirements set out in the Building Regulations and in particular the regulations governing the restriction of spread of flame over surfaces of ceiling and exceptions permitting the uses of certain plastic material. TYPES OF SUSPENDED CEILING The suspended ceiling can be classified as the way in which they are constructed as following: Jointless ceiling: These ceilings although suspended below the main form uses sheets of plasterboard. In these systems the plasterboard is fixed to the underside of the suspended framework. This can provide fire resistant ceiling and this may be one of the reasons for using this type of construction. Moreover it is not suitable for a situation where service is to be carried in the voids unless they can be approached from the floor area above. This type of ceiling is particularly useful where the ceiling needs to take s sculptured shape. It can provide a fire resistant ceiling construction. Jointed or frame and tile systems: These ceilings are the commonest form of suspended ceiling use in construction industry today. They constructed with a metal framed grid suspended from the floor or structure above. In this system the grid are fitted tiles made from different materials such as minerals fibre board, plaster and metal and it is supported by the grid. Generally these types of ceiling are easily constructed, maintained and easy means of access to services. Open ceiling: These ceiling are designed to give a visual barrier between the rooms below and the ceiling voids above by the use of an open grid. This type ceiling the light is fixed to the lower side of the ceiling. RAISED FLOOR TYPES OF RAISED FLOOR The shallow or battened floor: This type of floor is supported on battens fixed to the structural sub-floor. This type of floor provide spaces of wiring and the floor contain the acoustic properties of a floor and as cavities seldom exceeds 100mm is normally only used to conceal cable runs. Platform floor: This type of floor is supported on adjustable jacks whom rest on the structural sub-floor. Using pedestals an adjustable cavity with depth ranging from 40mm to 150mm depending on which proprietary system can be provided. It is suitable for most services installation requirements. SECTION TWO TECHNICAL DESIGN DECISIONS TO BE TAKEN TO SPEED UP CONSTRUCTION PROCESS Clients often demand faster construction so as to benefit from early completion of projects. Although there are notable examples where fast construction has been achieved, the consensus is that the construction industry has not been entirely successful in meeting clients expectations. This is mainly due to a disjointed industry, in which design is often separated from the construction activities. Traditional practices are proving inadequate, to the point where either they can no longer achieve the desired delivery time, or, if projects are forced to meet the programme, they do not provide the required quality and long term performance. If faster construction is needed, the level of attainment of the targets is an essential part of assessing the overall performance of the construction industry in meeting client needs. Site location The location of the structure on the chosen site is often fundamental to the success of the faster construction initiative. Attention should be paid to site topography, especially noting potential sources of problems such as the water table, contamination, existing structures, substations and overhead high load cables. Repetition Repetition is a most effective way to speed up activities. This can involve the use of standardised components installed in the same way each time. For detail installation, repetition might mean standardising the grade of concrete everywhere on the project at 35 N/mm2, avoiding the additional management time of checking on each pour. Repetition might involve keeping an element to a constant dimension or position e.g. all lighting pendants are in the centre of every room, or extract vents are always 150 mm down from the ceiling. Standard modules Use of identical or standard modules speeds construction because it simplifies the checking of drawings, fabrication and installation. The principle can be applied by using a standard dense concrete block for all block work, or by employing standard air handling units in roof plant or standard toilet pods within the building Orientation The orientation of the project could dramatically affect the speed of construction. A project located some distance from the site access is likely to have more space available for off-loading facilities and storage. If the project structure is close to the access point, or obstructs or restricts access to the remainder of the site, then faster construction is likely to be more difficult. Configuration The mass, height or plan shape of a project will significantly affect the ease and speed of construction. While massed elements may speed construction, they may also obstruct the site and so slow progress. For example, large ductwork elements reduce the number of joint connections that need to be made and so reduce construction time. However, the greater size and length of the elements might hinder access and slow the process down. Prefabrication, pre-assembly and modularisation. Consider the potential of methods based on prefabrication; pre-assembly and modularisation. Environmental and sustainability issues Recognise the environmental and sustainability issues inherent in faster construction on site. It will probably be necessary to expend equal or more energy over a shorter period to achieve the same end-product earlier. The procedures should ensure that the materials used are sustainable.

Animal Farm Essay example -- Literary Analysis, Orwell

I. Subject Animal Farm is about a group of animals that rebel against the farm owner in order to gain control of the farm and to be treated with more respect. It begins by explaining how the animals are wrongly treated by their owner, Mr. Jones. The setting is never made clear throughout the story but it is obvious to be set in the past, because of the dialog used as well as the tools used around the farm. Almost every animal in the story is a main character, although some standout more than others, including; Napoleon, Snowball, Mr. Jones, Old Major, and Boxer. Old Major is the protagonist in this novel because he is the character who instilled the correct morals into each animal. The animals are selfish and in the end, nothing turns out to be in their favor. Mr. Jones, the owner of the farm is cruel and mistreats his animals and does not take proper care of his farm. One day, the Old Major who is the wisest pig, tells the rest of the animals about a dream he has been having to get rid of their human master and run the farm on their own. After Old Major's death, two new leaders of the farm come into power and run Mr. Jones off of the farm which leaves the animals to fend for themselves and to take care of the farm by using a group effort. For a while, the animals work as hard as they possibly can to keep the farm in pristine condition and keep every animal fed with abundant amounts of food. The animals truly did keep much better care of the farm than Mr. Jones ever had. Shortly after, Napoleon becomes so selfish because of his power over the other animals on the farm, that he blocks Snowball from all of his power which then turns the other animals against him. Napoleon then uses Boxer, an intelligent horse to persuade t... ...n two legs. In the beginning of the story they were convinced to never walk on two feet because that was how their enemies walked. 9 IX. Genre The main genre of Animal Farm is political. Political is â€Å"a novel that deals with significant aspects of political life and in which those aspects are essential ingredients of the work† (Harmon 400). This novel has a political genre because it deals with politics in real life. Mainly the Soviet Revolution. A sub drama of Animal Farm is allegory. This means â€Å"a form of an extended metaphor in which objects, persons, and actions in a narrative are equated with meanings that lie outside the narrative itself. It represents one thing in the disguise of another† (Harmon 12). This novel is an allegory because every character and event that took place in the book represented something that happened in real life.

Shays Rebellion :: American History

Shays Rebellion 1) Shays' Rebellion, the post-Revolutionary clash between New England farmers and merchants that tested the precarious institutions of the new republic, threatened to plunge the "disunited states" into a civil war. The rebellion arose in Massachusetts in 1786, spread to other states, and culminated in an abortive attack on a federal arsenal. It wound down in 1787 with the election of a more popular governor, an economic upswing, and the creation of the Constitution of the United States in Philadelphia. Shay's Rebellion was the first armed uprising of the new nation. It was caused by the absence of debt relief legislation in Massachusetts. When the Revolution ended, merchants and creditors lobbied for high taxes and against paper money. They were successful. These procreditor polices underminded farmers' finances. The legislation, including foreclosure laws, were extremely taxing to farmers and caused many to go into great debt. Many farmers were dragged to court where they faced high legal fees and threats of imprisonment because of their debt. In 1786, farmers in Massachusetts attended extralegal meetings where they protested against high taxes and aggressive eastern creditors. Bands of angry farmers joined together to close law courts with force and freed debtors and fellow protesters from jail. Resistance to the legislation climbed to a full-scale revolt. John Adams, president at the time, answered with the Riot Act, which outlawed illegal assemblies. The rebellion was suppresse d by military force. The rebellion prompted leaders with national perspective to redouble their efforts and create a stronger central government. 2) Economic crisis: high taxes, mounting debt A series of tax revolts by Massachusetts farmers against the Massachusetts legislature in 1786-1787. After the Revolutionary War, the Massachusetts legislature imposed high taxes to pay war debts. Rural farmers could not pay their taxes and faced forfeiture of their farms. Resentment of the taxes increased to the point that the farmers began to break up court sessions to prevent judges from ruling that specific farms should be sold to pay tax bills. These minor acts of rebellion turned violent in January 1787 when Daniel Shays, a farmer and Revolutionary War veteran, led 1200 people into Springfield to seize weapons from a national government arsenal. Massachusetts State military troops quickly put down the rebellion, but the event shocked the nation at the time. Shays' Rebellion hinted that law and order were seriously breaking down across the new United States to the extent that the national government, under the Articles of Confederation, could not even protect its own arsenal.

Health Insurance Policy

HEALTH INSURANCE POLICY Normally the medical insurance will be available through employer. When the individual unable to get the medical insurance from the employer or seek separate coverage is advised to select individual health insurance plans. Such individual health insurance plan also known as private health insurance. The medical insurance coverage under such plans is ideal for the self employed persons. However who desires to have many options can also go for private health insurance.Long-term care insurance which is a different insurance product available in the United States. The product of LTC or Long Term care insurance helps to provide the cost of long-term care for a predetermined period. The LTI insurance not covered by health insurance, Medicare or Medicaid. The individuals who unable to perform the basic activities of daily living i. e. dressing, bathing, toileting, etc can choose the LTC. One advantage with the product is age is not determining factor to purchase the health insurance for Long Term care.The benefits of LTC include home care, assisted living, hospice care, assisted living etc. Even the product allows paying up to 7 days a week of 24 hours a day for rendering services by visiting care giver, housekeeper, duty nurse etc. Tax qualified and Non-tax qualified offered, hence the individual may choose according to availing tax benefits. Tax qualified policy requires the person to take care policy who are expected to require at least 90 days and unable to perform two activities of daily living.In case of Non-tax qualified policy, the person who is unable to perform one or activity of daily living can purchase the policy. Another insurance product is individual disability. Every disability insurance policy is will vary company to company. But it is not such product which can be purchased easily. Of course, the cheapest disability insurance policy can be purchased by just throwing money. It is such product designed to assist the individual when the income of the person is decreased by the illness in the occupation.The disability insurance also known as DI and the policy assures the holder against the risk that will arise from the work place. So paid sick leave, short-term disability benefits, long term disability benefits etc are covered under the product of DI. REFERENCE: 1. http://www. healthinsurancefinders. com/ 2. http://en. wikipedia. org/wiki/Long_term_care_insurance 3. http://www. about-disability-insurance. com/ 4. http://en. wikipedia. org/wiki/Disability_insurance

Paradise Vacation Case

Key Decisions: * Should Leduc agree to Air India’s offer? * What’s the company’s competitive strategy for 2008/2009? * How to respond to FunTours’ expansion and aggressive pricing strategy? SWOT Analysis: Paradise holds strong buyer power which enables it to bargain for lower price and discount. As market leader and Quebec company, Paradise can promote itself through reminding customer about company hisotry to strength their preference and loyalty . The weakness lands at that Quebec is the only market in Canada; the collapse of one location will damage the entire business.The threat mainly lands at pricing competition from FunTours. Competitive Analysis and Consumer Analysis: Because Paradise has its main market in Quebec, Benoix is the main competitor. However, the biggest threat comes from FunTours’ expansion currently. The competitive advantage of FunTours is its low pricing strategy. Travelling is has an elastic demand. With price being the most important determination, FunTours' strategy could drive Paradise out of the market. This strategy targets at mid and base segment of the market. It creates threat to the same segments for Paradise, which represent 90% of the revenue.Nonetheless, Quebec is a brand new market where FunTours does not have supplier connections or customer loyalty yet. FunTours serves no premium market where 10% of the revenue comes from for Paradise. Therefore, Paradise can utilize its bargain power with its suppliers to ask for lower prices, also lower its retail price to keep customers from switching to new brand, and advertise to strengthen brand loyalty. Segment| Focus| Conclusion| Base| Low price| Lower price than FunTours offers| Mid| Best value| Lower price than FunTours offers, and special promotion with higher value. Premium| Luxury service| Lower price to prevent customer from downgrading to Mid segment. Keep agents as partial distributors for better services. | Recommendation : Base and Mid package will be sold through internet solely; Premium package will be sold through both agent and internet by 50/50; at the same time lowering wholesale price by 5%, and asking Benoix Air for 5% discount on the flight. Implementation Plan: Paradise will reject the offer from Air India. We will stay with the original segments of consumers, and lower price to stop FunTours from ntering the market; at the same time, keep the package unchanged to ensure customer experiences; use promotional strategy to re-enforce brand name and loyalty. Product| Travel package provides both service and product. Paradise includes 3 packages targeting at base, mid and premium market. | Price (See Exhibit 4 for detail)| We will be using Value-based pricing strategy. We will set lower retail price to stop FunTours from entering the market, and to provide lowest price for Base segment, best value for Mid, and both luxury service and low price for Premium segment. | Retail| Base: 89| Mid: 134| Premium: 193(Ag ent) 178 (Internet)| | Wholesale| 88| 132| 176| | Tactics| Markdowns| Seasonal discount, coupons. | Markdowns. | Place| Indirect Distribution: -100% of base and mid, 50% of premium package through internet distributor -50% of premium package through travel agents with 10% commission| | Exclusive Distribution: Distribute through good reputation internet distributors only for the purpose of keeping professional brand image, and high-end travel agents to keep Premium customer privileged. Promotion| Objective: To re-enforce the brand image as a local and experienced travel operator who always respond to Quebec travellers' needs beyond expectation. | | Reminder Advertising: TV advertising and internet ad to re-enforce the brand image. Sales promotion: (1)Price promotion is mentioned above at Price section. (2)Loyalty points-collection program to encourage repurchase and creates loyalty; (3)Contests to win trips in order to increase consumer involvements and personal feelings. | Expected Results: See Exhibit 4 – Alternative 5//Recommendation for income statement.Appendixes Decision criteria: * Provide short-term viability * Provide long-term sustainability Alternative Evaluation * Cost cutting through partnership with Benoix and cost structure change to start a price war with FunTours. * Setting pricing strategy as price war and cutting cost through vertical integration. * Sell its packages through Internet distributors exclusively. * Offering packages to more remote and less developed destinations. Base and Mid package will be sold through internet solely; Premium package will be sold through both agent and internet by 50/50; at the same time lowering wholesale price by 5% and asking Benoix Air for 5% discount on the flight. Alternative 1, comparing all other 4, gets the least revenue (32,540,428). Although it is feasible in short-term and might drive FunTour out of the market, it does not concern with the obsolete of travel agents. Giving the negative reve nue for the base segment (see Exhibt 2), it is not long-term sustainable.Moreover, even if the competitor is eventually driven out the market, Paradise will have to raise the price again in order to get back on its previous profitability; Paradise runs into the risk that the customers will feel cheated and uncomfortable with the raising price, and thus shift to other operators. For Alternative 2, although leasing private airline will decrease the variable cost and increase revenue (71,192,907), Paradise runs into the risk of heavy responsibility for flight issues, decrease of flight destination and time flexibility, and high fixed cost, which will eventually be added to the price of the package.In addition to those, same problem with Alternative 1, it does not concern with the obsolete with travel agents. Thus, this alternative is not sustainable in the long-run. For Alternative 3, it addresses the problem of high agent cost, and the obsolete of agent distributor. 5% of revenue is a ssumed from using internet to reach broader customer base with lower retail price. However, the price is still higher for than FunTours’ offer (e. g. $93 vs. $90); therefore provides FunTours the chance to take away market share. It is short-term viable but not sustainable.Alternative 4 increases market variety but turns away from the main market (top 5), which is providing 89% of Paradise’s package sale. It equals to giving up a bigger pie for a tiny one. (Exhibit 2) The recommendation ranks the 3rd place in the 5 alternatives quantitatively. However, it provides both short-term viability and long-term sustainability. Lowering the price from utilizing the buyer power on Benoix Air gives Paradise the ability to win over FunTours price-wise in the short-run, and keep price low in the long-run.Internet distributor addresses the obsolete of travel agents. By offering both agents and internet distributor for premium market helps sustain our competitive advantage on luxury customers. Exhibit 1: Marketing Share, Value and Growth of Canada and Paradise Vacation for 2007 and 2008 Â  | Â  | Â  | Â  | Â  | PR Market Setments| | National| PR Canada | Quebec| PR Quebec | Base| Mid| Premium| Percentage| 100. 00%| 7. 80%| 20. 00%| 39. 00%| 60%| 30%| 10%| 2007| 6,400,000| 499,200| 1,280,000| 499,200| 299,520| 149,760| 49,920| 2008 4. 0% growth| 6,694,400| 522,163| 1,338,880| 522,163| 313,298| 156,649| 52,216| Exhibit 2 – Alternative 4 Market Share, Value and Growth for 2007 and 2008 | National| Paradise Canada| Other destinations other than top5| 8%| 11%| 2007| 512,000,000| 54,912,000| After 25% of expected growth | 640,000,000| 68,640,000| Exhibit 3 – Income Statement for Alternative 1 and 2 (2008) | Alternative 1 i| Alternative 2iv| | Base| Mid| Premium| Base| Mid| Premium|Total Revenue| 313,297,920| 156,648,960| 52,216,320| 313,297,920| 156,648,960| 52,216,320| | Agent| Internet| Agent| Internet| Agent| Internet| Agent| Internet| Agent| In ternet| Agent| Internet| Industry Total Sales| 72%| 28%| 72%| 28%| 72%| 28%| 72%| 28%| 72%| 28%| 72%| 28%| | 225,574,502| 87,723,418| 112,787,251| 43,861,709| 37,595,750| 14,620,570| 225,574,502| 87,723,418| 112,787,251| 43,861,709| 37,595,750| 14,620,570| Retail price| 90. 00ii| 82. 64| 135. 00| 123. 95| 180. 00| 165. 27| 90. 00| 82. 64| 135. 00| 123. 95| 180. 0| 165. 27| Commission| 8. 18iii| 0. 82| 12. 27| 1. 23| 16. 36| 1. 64| 8. 18| 0. 82| 12. 27| 1. 23| 16. 36| 1. 64| Wholesale price| 81. 82| 81. 82| 122. 73| 122. 73| 163. 64| 163. 64| 81. 82| 81. 82| 122. 73| 122. 73| 163. 64| 163. 64| costs of sales| | | | | | | | | | | | | Airline| 40| 40| 40| 40| 40| 40| 30v| 30| 30| 30| 30| 30| Hotel| 40| 40| 50| 50| 60| 60| 40| 40| 50| 50| 60| 60| Contribution| 1. 82| 1. 82| 49. 90| 49. 90| 63. 64| 63. 64| 11. 82| 11. 82| 49. 90| 49. 90| 73. 64| 73. 64| SG&A| 9. 00| 8. 26| 13. 0| 12. 40| 18. 00| 16. 53| 9. 00| 8. 26| 13. 50| 12. 40| 18. 00| 16. 53| EBITDA| (7. 18)| (6. 44)| 36. 40| 37. 5 0| 45. 64| 47. 11| 2. 82| 3. 56| 36. 40| 37. 50| 55. 64| 57. 11| Earning contribution| (8%)| (8%)| 27%| 30%| 25%| 29%| 3. 13%| 4. 30%| 26. 96%| 30. 26%| 30. 91%| 34. 55%| ` Earning| (18,000,390)| (6,840,346)| 30,410,785| 13,271,102| 9,531,852| 4,167,425| 7,063,444| 3,775,013| 30,410,785| 13,271,102| 11,620,505| 5,052,058| Total| 32,540,428| 71,192,907| i. Assume during price war, market share does not changeii.Retail price drops 10% for distributor of agent; wholesale price will shift according to retail price and commission change (Wholesale=Retail/(1+10% commission); internet retail price change according to wholesale and commission (Internet=wholesale*(1+1% commission). iii. Commission for agent will increase to 10%; internet stays the same as 1%. | iv: All assumptions from Alternative 1 holdv: Airline price decreases 25% from$40| Exhibit 4: Income Statement for Alternative 3 and Recommendation (2008) | Alternative 3vi| Alternative 5 – Recommendation ix| | Base| Mid| Premi um| Base| Mid| Premium| 48,271,360vii| 328,962,816| 164,481,408| 54,827,136| 334,445,530| 169,964,122| 43,861,709| | Internet| Internet| Internet| Internet| Internet| Agent| Internet| Segment Percentage| 100%| 100%| 100%| 100%| 100%| 50%| 50%| | 328,962,816| 164,481,408| 54,827,136| 334,445,530| 169,964,122| 21,930,854| 21,930,854| Retail price| 93. 53| 141. 30| 187. 05| 88. 85| 134. 23| 193. 534xi| 177. 70| Wholesale price| 92. 6| 139. 9| 185. 2| 87. 97xii| 132. 905| 175. 94| 175. 94| costs of sales| | | | | | | | Airline| 40| 40| 40| 38| 38| 38| 38| Hotel| 40| 50| 60| 40| 50| 60| 60| Contribution| 12. 6| 49. 9| 85. 2| 9. 7| 49. 9| 77. 94| 77. 94| SG&A| 8. 42| 12. 72| 16. 83| 8. 00| 12. 08| 19. 35| 15. 99| EBITDA| 4. 18| 37. 18| 68. 37| 1. 97| 37. 82| 58. 5866| 61. 95| Earning contribution| 4. 47%| 26. 32%| 36. 55%| 2. 22%| 28. 17%| 30. 27%| 34. 86%| Earning| 14,711,841| 43,283,583| 20,038,677| 7,428,695| 47,885,482| 6,638,907| 7,645,225| Total| 78,034,101| 69,598,308| vi: Because that internet distributor can reach more customer, 5% growth on expected revenue (2008) is assumedvii: Total revenue after 5% assumed growthviii:With internet distributor, SG&A decrease by 10% from before, for agent, it stays the same| ix:. % revenue growth is assumed same from Alternative 3 due to the use of internet distributor. Premium market as luxury will decrease due to the upcoming recession, it is assumed that Premium segment will decrease to 8%, Base and Mid will increase by 1% each. X: From bargaining with Benoix Air, a 5% discount is expected. xi: 10% commission on agent is provided. Xii: Taking 5% off wholesale price|

Miscommunication Essay

After reading the article, â€Å"Close Relationships Sometimes Mask Poor Communication†, I realized that miscommunication can be a part of our everyday lives with those that we are closest to. I am sure that many of us have thought that we know someone well enough to figure out what they are saying without giving it a second thought. In reality, chances are that this is not the case at all. My wife and I have been married for six and a half years and dated for several years before we were married. Although we believe we think we know each other like the back of our hand, sometimes truly we do not have a clue what the other person is trying to say or portray. We both take for granted the fact that we believe we know each other so well. Luckily for the both of us, most of our miscommunications are nothing that has major consequences. Nine times out of ten, it is something that it’s as simple as what we will have for dinner with our family. However, there are those very few times when our miscommunications are much more serious. Our most serious miscommunication that I can remember is our scheduling conflicts. I work full time, volunteer on our local fire department, schoolwork, and at this time I am volunteering on two separate committees that I have to attend meetings weekly. My wife is also a college student, volunteer EMT for our rescue squad, and tries to keep up with the duties of appointments and seeing that everyone in my home gets to where they need to be at a particular time. Often times we mis-communicate with each other regarding our busy and hectic schedules. This often leaves us in a bind of trying to find a babysitter or deciding which one of us can reschedule what we have going on for that day or week. To try to prevent these communication errors in the future, we are trying to make sure that all of our events get posted on the calendar well in advance. This plan has just begun for the both of us so we are hopeful to have less mis-understandings of our schedules.

Helga by Andrew Wyeth

The â€Å"Helga Pictures† by Andrew Wyeth are a fantastic compilation of tempera and dry brush paintings, watercolours and pencil studies secretly created within a span of over fifteen years. Andrew Wyeth created over two hundred and forty individual works of neighbor Helga Testorf from 1971 to 1985 without telling a single person, including his wife. He stated that he would not have been able to have finished the project with everyone looking at it. (Allen) The large number of works and the palpable charge that runs through them suggested more than a simple artist-and-model relationship.The Helga chapter landed on the covers of Time and Newsweek as the public speculated over whether Wyeth, then 69, had had an affair with the woman 22 years his junior. As the Wyeths tried to explain the relationship, the art world wondered whether the secrecy and subsequent revelation had been staged simply to raise the popularity and price of the paintings. â€Å"It was a love affair with th e burning love that I've always had toward the things I paint,† Wyeth said of the Helga paintings. â€Å"If I don't have it, the painting goes ordinary, routine. (Nelson/Oliver) Stung by criticism over the â€Å"Helga hoopla,† Wyeth denied there had ever been a sexual relationship, and his wife admitted that not all of the works had been kept secret from her. When critics accused the Wyeths, and Andrews, of being â€Å"hucksters,† the artist verbally shrugged, saying critics â€Å"were just looking to bop me on the head. † (Nelson/Oliver)) So who is Helga Testorf? She is a Prussian-born immigrant who was a caregiver to one of Wyeth’s neighbors, Karl Kuerner, near his home in rural Chadd’s Ford, Pennsylvania.She was 32 years old when Wyeth first met her in the early 1970s, and something about the blond beauty stirred the artist in a very profound way. They were merely acquaintances for a while until finally Wyeth asked her to pose. Helga had never posed before but was willing. (Museworthy) In 1986, when the â€Å"Helga Pictures† were revealed, Mrs. Testorf was a middle-aged mother of four, living with her husband John on a secluded property called Zum Edelweiss on the other side of Chadds Ford from Wyeth's home. (Museworthy)Helga, like her employer Karl Kuerner, was of German descent. Helga immigrated to the United States and Chadds Ford, Pennsylvania in 1961, eventually became a mother and homemaker before becoming Karl’s caregiver. Due to her association with Mr. Wyeth, she eventually developed an keen interest in poetry and art. Before Andrew Wyeth’s death, Helga was one of the ailing artist’s primary caregivers. Why Andrew Wyeth became infatuated with this Pennsylvania Fraulein is unclear, other than he obviously found her a fascinating subject.Some hypothesized that it was her reddish blonde hair that set the tone for this series of renderings by the enigmatic artist, that drew Wyeth to concentrate so much time and effort on the interpretation of this woman‘s visage and the ego within. Her chiseled features, her supple form, her pensive stare and ultimately, Helga’s innate devotion to the process could have given the great artist the insatiable purpose to slavishly devote so much of his creative energies to one subject.Some folks; however, luridly speculated that Helga’s alluring visage engendered a passionate affair between she and the doting artist. For those who considered an affair was afoot, Andrew Wyeth‘s wife Betsy did not disappoint. (Day) Betsy, his wife of many decades and who was also his business manager, is said to have let rumor run unabated until she sold the entire series to Leonard E. B. Andrews in 1986. It has been estimated, that the series sold well in excess of over six million dollars.She then denied that the scathing rumor was true, and was convincing to the point of believability. Today the rumor is not the subject, but rather Andrew Wyeth's profound artistry within the Helga series. (Day) Andrew Wyeth and Helga Testorf remained close friends until his death. Their relationship, and the art created as a result, has endured over many, many years. The Helga series is artist/muse embodied to perfection. And every artist should be so lucky to find his Helga. Museworthy) Works Cited: Allen, Scott. â€Å"Andrew Wyeth/The Helga Pictures. † Cure the Blind. 6 July 2009. Web. 10 Nov. 2012. Nelson, Valerie and Oliver, Myrna. â€Å"Hugely popular painter Andrew Wyeth dies at 91. † Los Angeles Times. 17 January 2009. Web. 10 Nov. 2012. â€Å"Andrew and Helga. † Museworthy. 31 August 2008. Web. 10 Nov. 2012 Day, Wyatt Sanderman. â€Å"Andrew Wyeth’s Helga: a Compulsive Fetish or his Best Work. † Beaufort County Now. 29 September, 2009. Web. 10 Nov. 2012.

Business Plan for Educational Website

Business Plan for Educational Website 1.0 Executive Summary Stay Clean, is a site that is based on Environmental Management Practices Education. It is owned and operated by me, Morrison Edwards. I am determined to ensuring that people live in an environment free of contaminations and appealing to live in. I am thus taking the initiative to educate people on how we can make our environment friendlier for habitation. The people are taught to carry out environmental practices once in a month. The activities involved in the practices are quite simple and are meant to encourage people on how the little changes they make in the initiative can make an enormous difference to the environment and their personal lives. The sources of revenue supporting the plan are from my personal savings from employment. I will be organizing with other affiliate companies and retailers to provide me with the products I will require in the process. Our benefits will be commission based from the sales of the products used in the environmental management practice. Financially the strategy is aimed at making profits, and of most concern will be minimizing expenses. A portion of the profits will be ploughed back into the business while the rest will be used for personal growth. I believe that it is a just course to keep our environment clean as much as the initiative is also a money creating opportunity. The cash flow into the action is a priority as well as the cash balance. In accomplishing my goals, the following areas are going to be of emphasis. The web content must be of the best quality and interactive to the users. The tips will be elaborate and engaging, inspiring and empowering so that the users will share the tips quickly enough to improve the use of the website. The project is aimed for gross profits in the future and so I will cut the current expenses to meet my current demands. The products that will be required in the process of the affiliate companies will have to be recommended on the website for buying by the people so that the profits gained from the commission will be used in the initiative. Since I do not intend to use more money in the expenses the online marketing plan will have to be perfectly effected to meet the expectations. 1.1 Mission The website is an educational platform meant to teach people on how to maintain the environment clean by performing cleanliness practices at least twice in one month. For the entire year. I am looking forward to enlightening people so that they become more environmentally conscious. In the process the affiliate institutions and retailers will have the opportunity to sell their products. The profits will be shared among all the member parties, the producing companies, the retailers and me. 1.2 Objectives of the Plan i) To conducting weekly environmental teaching sessions. Educate people on how their contribution in maintaining the environment will reduce environmental hazards or detrimental environmental impacts on the general popu lation. ii) At the end of the first year the website should have approximately 500 subscribers already signed up for the weekly tips on the environment. iii) The site must receive 10,000 customers monthly. iv) Profits will be evaluated within six months. v) The Profit will be redistributed to support the project and into personal savings. 1.3 Important Factors of success i) The Website content will have to be quality; the weekly tips will be elaborate and straightforward, friendly and inspiring. ii) The marketing of the site must be exquisite for maximum subscription iii) The expenses will remain flat to maximize profitability. iv) The products sold will be environmentally friendly and the buyers will have to be inspired so that the commissions care increased to make profits. 1.4 Summary of the Business The Stay Clean initiative is a small business website based in Marina and it is purposefully meant to enlighten the community on the effectiveness of cleanlines s to minimise the impacts of environmental hazards. The cleanliness initiatives training will be conducted twice a month as explained on the website. The teaching sessions are conducted online on the website or on weekly meetings for an individual attendance. The weekly audience subscription is free. The business will be making profits from commission received by the sale of products obtained from the Affiliate Company and retailers supplying the products to be used in the initiative. 1.5 Financial Plan I am looking forward to starting the initiative with a capital of 3000 dollars obtained from my personal savings. This will be used to come up with the website and in facilitating services of the Affiliate Company and retailers. The money will also be spent on the legal purposes and acquiring the computer equipment and in registering the computer domain for the name of the website. The remaining expenses will remain untouched until income generation begins. 1.6 Ownership of the Business Initiative The Stay Clean Business initiative is a sole proprietorship, a plan created and founded by (name). It is an enlightenment effort as well for personal growth The Products involved The business does not produce the required products on its own. I am marketing earthly friendly products recommended for cleaning and maintaining the environment. The products will be acquired from a company and retailers who will be paying the commission based on the sales of the products made. The company and the retailers are the affiliate parties. The goods thus will not be costly thus the cost of production is cut. The fulfillment and the inventory levels or the customer service. The only risk involved in the business is that the profit is commission based and only received in terms of percentage of the sales obtained from mobilization through the website organised weekly teaching sessions, and not from the entire sales. The recommended environmentally friendly products are: i) Products that can be reused. These are products that can be put back into use like lunch bags, batteries etc. ii) Supporting consumption of organic foods: vegetables, fruits, and snack meals. iii) Paper products that can be recycled. iv) Cloth diapers. v) Kitchen products: Cloth rags, towels etc. vi) Herbal medicines. vii) Low water usage: Shower heads, horse pipes and equipment that reduce water use. viii) Books on environmental friendliness. xi) Solar powered appliances and the tools and equipment running on solar. x) Music about environmental maintenance and friendliness. Market analysis Out target market is the general community especially the internauts or the technology survey who can access the internet in the age bracket of 18-55 years. This is the target group that can be used to make the environment better. The secondary market target are the students of age 12-22 who can have adequate time engaging in the environmental management practices. The retired people are also focused as they have more free time to attend the training sessions. 4.2 Target market Segment Strategy Since our primary aim is to live in an environmentally friendly atmosphere while also making profits, we have particular reason for the targeted market 1. The students – We engage them as they are technology survey and will pass the information faster to their associates, again they will embrace the initiative as they like clean surroundings 2. Adults – It is the largest market and the biggest target. They are the individuals who will be purchasing the products thus significant in revenue generation. 3. The retirees. They have more free time and resources to spend on initiatives that are environmentally friendly. 4.3 Industry Analysis The website is meant for educational reasons and since the educational sites are hardly available the completion is slim. The existing environmental sites deal with either giving news on the envir onment or other environmental topics not related to the latter. The website is an environmental friendly pro initiatives marketing products aimed at improving the environment from which the sales will receive the profits that is commission based. 4.4 Buying patterns Our focus is on enlightening people on the products they knew never existed and going by the friendliness in the adverts and inspiration, the customers will definitely chose us over other competitors as the information provided is simple and comprehensive but not overwhelming. Those who shall have adopted the information will just be buying the products and mostly will be introducing more people thus an increase in the product sales increasing out profits. The product finding process will be simplified so that they can easily be found in the Affiliate Company and retailers. (Software, 2017). References Bryman, A., & Bell, E. (2015). Business research methods. Oxford University Press, USA. Finch, B. (2016). How to write a business plan. Kogan Page Publishers. Hollensen, S. (2015). Marketing Management: A Relationship Approach. Pearson Education. Huynh, M., Appell, R., & Stetkiewicz, M. (2014). Process mapping. Software, P. A. (n.d.). Educational Website Business Plan. Retrieved February 21, 2017, from http://www.bplans.com/educational_website_business_plan/financial_plan_fc.php

Gender and Social Space Essay Example | Topics and Well Written Essays - 1500 words

Gender and Social Space - Essay Example In addition to this, the three motility factors are considered; ambiguous transcendence, inhibited intentionality and a discontinuous unity (Young, 1990), with respect to the feminine gender is also discussed. The effect is also seen in the major work that women and men undertake. Women inherently have or at least they think they have a weaker body. More often this is written down as the weaker sex. This idea sinks in their mind and is reflected when ever they do a job that is physically challenging. Let it be to lift a heavy object or to move something heavy. The tendency is to maintain this tendency of the women to maintain the weakness attitude in their body (Alphonso Lingis, 1994). This idea is reflected when ever they move in the social space. Whether it is to get their luggage out of their cars or to change tires in their cars, they look for help from more 'able' men. This attitude of a physiological disadvantage is reflected in every one of the activities of the women. As a matter of fact, the same is also reflected in the activities that are carried out by men too. They treat women as if they are incapable of doing even the simplest of the jobs. Whether it is a question of lifting the kid while they are on a long walk or it is to check whether the depth of the pool is good enough for a dive if it is not announced; the risk is always taken by the men. This tendency to being risk averse is not some thing new to the women. They consistently stay out of risk. For instance, they do not try to be heroic with a robber normally. They expect the male to be the chauvinistic hero who will save the women in need. This is also a physiological condition where the women tend to show reluctance in shouldering responsibilities (Anton Mischewski, 2005). On most occasions, one would also notice that the women tend to display a personal safety measure that is normally higher than what men do. May be this also could be attributed to the risk averseness that the women generally display (Aileen Moreton-Robinson, 2000). But then, it is also personal safety motivation that is more prominent and the tendency to save their skin rather than to get themselves hurt. This is not present in the men; even if present it is so only for a lesser extent. Psychological Activities Most of the activities of the women and men are controlled by the tendencies created and cultured in their mind. This seems to reflect the paternal traits of our society much more than the maternal traits. The effect of the male supremacy is ingrained in the thought process of not just the male but also the female in our society (Jones HG & Dr Kirkman M, (eds.), 2007). This reflects heavily in everything that is written and said about the female and male behavior. Therefore, this also cultivates the same behavior in both the genders. The tendency to accept the male superiority with out question is common place among women as much as it is with men. Whether it is to provide the right action while playing a game and provide the physiological activity that is needed to the job or it is for the people to provide mathematical or scientific reasoning for a thought process, the way the women think is substantially different from what the male does. In most of the cases, the woman generally under estimates her capabilities